ADEMCO VistaKey-SK, Инструкция по установке и настройке

Страница: 48 / 108

VistaKey Installation Guide
5–8
Days
Event
Event
No.
Event
Name Event
Specifier
Action
No.
Action
Desired
Action
Specifier
Time Window
(00= Always, 01-20
= Time Window #)
M T W T F S S H
1 22 AP Grt 01 01 Relay On
2
6. Enter the Action Specifier that corresponds to the description in Table 5-1:
Action Codes.
Example: Enter 01 for relay number 1.
Days
Event
Event
No.
Event
Name Event
Specifier
Action
No.
Action
Desired
Action
Specifier
Time Window
(00= Always, 01-20
= Time Window #)
M T W T F S S H
1
22 AP Grt 01 01 Relay On 01
2
7. Enter the Time Window number that corresponds to the time window
(previously programmed) for the time period during which the event should
trigger the action.
Example: Assume that time window 01 has a start time of 08:00 AM and end time of 05:00
PM. Enter 01 for time window 1.
Days
Event
Event
No.
Event
Name Event
Specifier
Action
No.
Action
Desired
Action
Specifier
Time Window
(00= Always, 01-20
= Time Window #)
M T W T F S S H
1 22 AP Grt 01 01 Relay On 01
01
2
8. Place and X under each Day that the event/action is to occur within the time
window specified. Note that when Holiday is selected, it will over-ride the day of
the week selection (e.g., Holiday is selected and the holiday falls on Saturday
but Saturday is not selected, the Holiday selection makes the event/action
occur). For additional information, refer to Holiday Schedules in your alarm
system manual.
Example: Enter an X under M, T, W, T, and F for Monday through Friday.
Days
Event
Event
No.
Event
Name Event
Specifier
Action
No.
Action
Desired
Action
Specifier
Time Window
(00= Always, 01-20
= Time Window #)
M T W T F S S H
1
22 AP Grt 01 01 Relay On 01 01
X X X X X
2
Following the example above, the access grant at access point 1 (event) turns on relay # 1
(action).
9. Repeat steps 1 through 8 for each event/action desired.