ADEMCO VistaKey-SK, Инструкция по установке и настройке

Страница: 64 / 108

VistaKey Installation Guide
5–24
If you enter a number from 01 through 32, the keypad displays the
following prompt.
If you enter 00, the alarm system control advances to Quit
Programming.
↓
Event/Action Number
01 Acs Event?
None
00
Enter two digits defining the number for the event from the Event
No. column of your worksheet. The entry falls into 1 of 6 different
categories. Acceptable entries are as follows:
Partition Specifiers
No. Description No. Description
00 None (Not Used) 09 Duress Ptn
01 Arm Ptn 10 Duress Restore Ptn
02 Disarm Ptn 11 Trouble Ptn
03 Fire Ptn 12 Trouble Restore Ptn
04 Fire Restore Ptn 13 Bypass Ptn
05 Burg Ptn 14 Bypass Restore Ptn
06 Burg Restore Ptn 15 Late Disarm Ptn
07 Alarm Ptn 16 Early Arm Ptn
08 Alarm Restore Ptn 17 Fail Arm Ptn
User Specifiers
No. Description No. Description
18 Arm User 20 Grant User
19 Disarm User
Card ID Specifiers
No. Description
21 Grant Card
Access Point (AP) Specifiers
No. Description No. Description
22 AP Grant 30 Duress Grant
23 AP Deny 31 Prop Open Alarm
24 AP Bypass 32 Prop Open Restore
26 AP Lock 33 Force Open
27 AP Protect 34 Force Open Restore
29 AP Grant Override
Zone Number Specifiers
No. Description No. Description
35 Fire Zone 40 Alarm Restore Zone
36 Fire Restore Zone 41 Trouble Zone
37 Burg Zone 42 Trouble Restore Zone
38 Burg Restore Zone 43 Bypass Zone
39 Alarm Zone 44 Bypass Restore Zone
Arming Specifiers
No. Description No. Description
45 Arm Stay Ptn 49 Arm Stay User
46 Arm Away Ptn 50 Arm Away User
47 Arm Instant Ptn 51 Arm Instant User
48 Arm Maximum Ptn 52 Arm Maximum User
Press [
✲
] to accept the entry.