ADEMCO VistaKey-SK, Инструкция по установке и настройке

Страница: 22 / 108

VistaKey Installation Guide
2–10
3 Office Workers a. Can access point 1 and arm/disarm
partition 1 during time schedule.
b. Valid card swipe automatically
disarms partition 1.
c. Can access point 2 only while
disarmed and during time schedule.
Cannot arm/disarm partition 2.
d. Cannot access point 3 or arm/disarm
partition 3.
4 – Operator B
4 Factory Managers a. Can access points 1 and 3 during
time schedule while partitions armed
or disarmed.
b. Valid card swipe automatically
disarms partitions 1 and 3.
c. Cannot access point 2 or disarm/arm
partition 2.
2 – Manager
5 Factory Workers a. Can access point 1 and arm/disarm
partition 1 during time schedule.
b. Valid card swipe automatically
disarms partition 1.
c. Can access point 3 only while
disarmed and during time schedule.
Cannot arm/disarm partition 3.
d. Cannot access point 2 or arm/disarm
partition 2.
4 – Operator B
VISTA User Code Partition Assignment
Description
When VISTA user codes are entered into the VISTA control panel, they can be given access
to any or all of the three partitions in our system. Used along with the Armed Restriction
feature we discussed earlier, we can control which access points a cardholder can enter if
that partition is armed.
How this feature is used in our example
•
Executive Officers have been assigned a user code that allows access to all partitions.
Executive officers have been assigned executive privilege, and although they automatically
inherit (by default) all the attributes that allow them to arm/disarm partitions upon a valid
card swipe, we recommend programming them as a user in the VISTA system so that they
can perform other security system functions.
•
Office Managers have been assigned a user code that has access to partitions 1 and 2
when armed.
•
Office Workers, who normally have access to partitions 1 and 2, have been assigned a
user code that has access to only partition 1 (when armed). Partition 2 Armed Restriction
was previously selected for the office workers preventing them from entering partition 2
when armed.
•
Factory Managers have been assigned a user code that has access to partitions 1 and 3
when armed.
•
Factory Workers, who normally have access to partitions 1 and 3, have been assigned a
user code that has access to only partition 1 (when armed). Partition 3 Armed Restriction
was previously selected for the factory workers preventing them from entering partition 3
when armed.
Where to program
User Code Programming. See VISTA control panel User Guide for more information.