USER MANUAL
BEAT HF
Edition: January 2016
- MODE OF USE
Revision: No. 4
50
Job:
Accepting this option allows you to gain access to the following setup options of a job:
Show
OFF
Compulsory
OFF
Reset
OFF
Use the or keys to shift from OFF to ON or vice
versa. Press the and keys to move to the desired
option.
Press the <START> key to validate the changes made.
Press the <STOP> key to exit this option without mak-
ing any changes.
When selecting ON in Show, the job identification screen is enabled when the unit is
turned on (sequentially after the identification of the operator, if it is enabled). At this
stage, this identification can be done or not, optionally, and allows the entry of any alpha-
numerical identification up to 16 characters.
The following option allows you to establish the obligation or not of identification:
Show
ON
Compulsory
ON
Reset
OFF
Press the and keys to move to the desired option.
Use the or keys to shift from OFF to ON or vice
versa.
ON enables the obligation and in turn automatically
makes the job ID in the Show option shifts to ON it
still happened to be OFF.
Identification is now obligatory, allowing any alpha-numerical ID up to 16 characters to
be introduced, by means of a barcode or manually, either way.
Finally, the latest option Reset allows to establish the way to delete the job’s identifica-
tion entered.
Show
ON
Compulsory
ON
Reset
ON
Press the and keys to move to the desired option.
Use the or keys to shift from OFF to ON or vice
versa.
ON is used to delete the job’s ID every time the unit
is stopped whereas OFF is used only with the change
of date.
Press the <START> key to accept the selection made. Press the <STOP> key to exit the
option without making any changes.
Additional data:
Accepting this option allows you to gain access to the following Additional data setup
option:
Show
OFF Use the or keys to shift from OFF to ON or vice
versa.
Press the <START> key to validate the changes.
Press the <STOP> key to exit this option without mak-
ing any changes.
