USER MANUAL
BEAT HF
Edition: January 2016
- MODE OF USE
Revision: No. 4
22
Ø
On the initial screen Read barcode, the unit remains on hold while the barcode of the
job number is being read using the optic pen or scanner.
dd/mm/yy
hh:mm
Job
ABCDEFGHIJKLMNOP
Confirm
The decoded job number is shown.
If the barcode or reading were erroneous.
dd/mm/yy
hh:mm
Job
----------------
Wrong data
If a barcode is entered incorrectly, the unit emits two
acoustic signals and shows a Wrong data message on
the screen. Either press <STOP> or <START> to go to
the Read barcode screen and repeat the entry
procedure.
Once the identity has been decoded correctly, press <START> to confirm and to go on to
the next screen.
Ù
If a job number has not been entered by means of a barcode, press either the or
arrow once to select the Manual edition option on the next screen. By pressing
<START> a cursor will appear in the first position on the left of the field to be edited.
dd/mm/yy
hh:mm
Job
$
----------------
Manual edition
Manually introduce by using the buttons of the arrows.
Maximum 16 alpha-numerical characters. Characters
accepted: capital letters, 0 to 9 and the symbols . , +
* < > / space - ( ).
Press the and arrows to move the cursor to another field and the and arrows to
select the values. Press <START> to accept and to go to the next screen.
dd/mm/yy
hh:mm
Job
ABCDEFGHIJKLMNOP
Confirm
Press either the or
arrow once to select the
Erase screen.
dd/mm/yy
hh:mm
Job
ABCDEFGHIJKLMNOP
Erase
Press <START> to accept and to go to the next screen or select Erase if the job number
needs to be altered. Go back to Read barcode.
Ú
If the set up for job number entry is optional, the entry step can be omitted by selecting
the Skip over option.
Press <START> to go to the next screen.
