Acuster BEAT HF, Руководство пользователя

Страница: 25 / 65

USER MANUAL
BEAT HF
Edition: January 2016
Revision: No. 4
MODE OF USE - 25
3.3.5 Entering the traceability (ISO 12176-4): only if enabled
Once the operator, job and additional data ID have been entered, or not, or if disabled,
the following screen will appear when the unit is turned on:
Initial screen
Ø
: Next screen
Ù
: Final screen
Ú
:
dd/mm/yy hh:mm
Traceability
----------------
----------------
Read barcode
dd/mm/yy hh:mm
Traceability
----------------
----------------
Edit barcode
dd/mm/yy hh:mm
Traceability
----------------
----------------
Skip over
Ø
On the initial Read barcode screen, the unit remains on hold while the fitting barcode
is read using an optic pen or scanner. When the identity is entered:
dd/mm/yy hh:mm
SOCKET
PE1OO AG
63 SDR11
Confirm
Code 128 of 26 characters. The fitting’s decoded
traceability is shown.
If the barcode or reading were erroneous.
dd/mm/yy hh:mm
Traceability
----------------
----------------
Wrong data
If the barcode is entered incorrectly, the unit emits two
acoustic signals and a Wrong data message appears
on the screen. Press either <STOP> or <START> to go
to the Read barcode screen and repeat the proce-
dure.
Once the identity has been correctly read, press <START> to accept and go to the next
screen.
dd/mm/yy hh:mm
Component 1
----------------
----------------
Read barcode
dd/mm/yy hh:mm
Component 1
----------------
----------------
Edit barcode
dd/mm/yy hh:mm
Component 1
----------------
----------------
Skip over
On the Read barcode screen the unit remains on hold while the component barcode is
being read using an optic pen or scanner. If the data is not entered using a barcode, press
either the or arrow to select the Edit barcode or Skip over option.