USER MANUAL
BEAT HF
Edition: January 2016
- MODE OF USE
Revision: No. 4
18
MODEL BEAT HF-Tr
3.3
TRACEABILITY
3.3.1 Introduction:
As defined in ISO 12176-4, traceability is the ability to create a trace of the history, the
purpose or the location of information, by means of records.
If all or some of the traceability options available in the unit are required, refer to clause
3.5 - ACCESS TO OTHER MENUS, where selecting Setup / Options the necessary
traceability functions can be enable. Those are:
C
Operator identification
C
Job identification
C
Additional data
C
Traceability
3.3.2 Entering the operator number: only if enabled
If the entry of operator’s ID is enabled, the unit allows the identification to have different
setups:
C
Optional setup by operator:
- It can be omitted by selecting Skip over and pressing the <START> button.
- It can be introduced by using a barcode or manually.
- It does not check for expiry nor attributes.
C
Obligatory setup by operator:
- Identification must be introduced without choice.
- It can be introduced by using a barcode or manually.
- It does not check for expiry nor attributes.
C
Operator’s setup according to ISO 12176-3:
- Identification must be introduced without choice.
- It can be introduced by using a barcode or manually.
- Expiry and functions are checked.
C
Setup of entry time:
- If it is setup as OFF, the operator’s identity will be saved throughout the day
until zero hour of the next day. The identity can be modified or erased at any
stage.
- If it is setup as ON, the operator’s identity will be lost each time the unit is
turned off. It will need to be reintroduced.
The following screen will appear when the unit is turned on:
If an operator’s identity has been previously introduced:
Initial screen:
Next screen:
dd/mm/yy
hh:mm
Operator
A 1234/724/SG
Confirm
Press either the or
arrow once to select the
Erase screen.
dd/mm/yy
hh:mm
Operator
A 1234/724/SG
Erase
