ActronAir PKY470T-6Q2, Инструкция по установке и наладке

Страница: 18 / 80

18 Installation & Commissioning Guide PKY470-700 Tri-Capacity Package with CM100 Control
Doc. No.0525-032 Ver. 9 180921
REVISIONS SA/RA ANGLE ASSEMBLY/INSTALLATION INSTRUCTIONS:
1. PCR2242 - Added note re: SA/RA LH/RH sides configuration are not factory fitted - MW
2.
3.
4. .
UNIT PREPARATION
SUPPLY AND RETURN ANGLE PLATE ASSEMBLY / INSTALLATION
NOTES:
1. All bolts, rivets and supply & return plates are supplied
with the unit.
2. All items are packed and located inside return air
plenum (either beside indoor plug fan or on the filter rail)
3. Apply PVC closed cell tape (supplied) to adjoining contact
edges before fastening bolts to ensure tight air seal.
4. Tools required (not supplied): rivet gun and socket wrench.
UNIT ASSEMBLY
SUPPLY AIR ANGLE AND RETURN AIR ANGLE SUB-ASSEMBLY
Supply Angle
Assembly
Return Angle
Assembly
“A”
SA / RA - Angle
Short Plate
SA / RA - Angle
Long Plate
Assemble supply air and return air angle plates using
the provided rivet as shown in illustration on left.
Materials:
2 Pcs - Supply Angle Short Plate
2 Pcs - Supply Angle Long Plate
2 Pcs - Return Angle Short Plate
2 Pcs - Return Angle Long Plate
24 Pcs - Rivets
32 Pcs - 10G x 1/2 Philip Pan Head Screws
1 Roll - PVC Closed Cell Tape
Attach the supply angle assembly onto supply air
opening by following detail - A procedures below.
Follow step to attach the return angle assembly.
2
1
2
3
Rivets
Detail - “A”
Supply Air / Return Air Assembly
Installation Details.
Line-up mounting holes
of SA & RA assemblies
with Base SA & RA
mounting holes
Screw-in SA & RA
assemblies unto
Base
2
1
IMPORTANT NOTE :
Bottom Supply Air / Return Air angle options are not factory fitted.
These are to be field assembled and fitted by the installer.