ABB NPBA-01, Руководство по установке и запуску

Страница: 21 / 68

Chapter 5 – Programming
Installation and Start-up Guide for NPBA-01 5-2
Table 5-1 The ACS 600 parameters to be set on NPBA-01 installation.
Parameter Alternative Settings
Default
Setting Recommended
Setting
98.2 COMM.MODULE YES; NO NO YES
51.1 MODULE TYPE NPBA SW1.0
51.2 PROFIBUS MODE FMS; DP-PPO1; DP-PPO2;
DP-PPO3; DP-PPO4; DP-PPO5 DP-PPO1
51.3 STATION NUMBER 2 to 126 2
51.4 BIT RATE SELECT 9.6KBIT; 19.2KBIT; 93.75KBIT; 187.5KBIT;
500KBIT; 1.5MBIT; AUTO AUTO
51.5 WRITE PPO
DATA SET SEL 0 to 255 0
51.6 READ PPO
DATA SET SEL 0 to 255 0
10.1 EXT1 STRT/STP/DIR NOT SEL; DI1; ...; DI6,5; KEYPAD;
COMM.MODULE DI1,2 COMM.MODULE
10.2 EXT2 STRT/STP/DIR NOT SEL; D1; ...; DI6,5; KEYPAD;
COMM.MODULE NOT SEL COMM.MODULE
10.3 DIRECTION FORWARD; REVERSE; REQUEST FORWARD REQUEST
11.2 EXT1/EXT2 SELECT DI1; ...; DI6; EXT1; EXT2; COMM.MODULE EXT1 COMM.MODULE
11.3 EXT REF1 SELECT KEYPAD; AI1; ...; MAX(AI2,AI3);
DI3U,4D(R); ...; DI5U,6D; COMM.MODULE
AI1 COMM.MODULE
11.6 EXT REF2 SELECT KEYPAD; AI1; ...; MAX(AI2,AI3);
DI3U,4D(R); ...; DI5U,6D; COMM.MODULE
KEYPAD COMM.MODULE
12.1 CONST SPEED SEL NOT SEL; D1 (SPEED1); DI2 (SPEED2);
DI3 (SPEED3); DI4 (SPEED4);
DI5 (SPEED5); DI6 (SPEED6); DI1,2;
DI3,4; DI5,6; DI1,2,3; DI3,4,5; DI4,5,6;
DI3,4,5,6 DI5,6 NOT SEL
15.1 ANALOGUE OUTPUT1 NOT USED; P SPEED; ...; CONTROL DEV SPEED
15.6 ANALOGUE OUTPUT2 NOT USED; P SPEED; ...; CONTROL DEV CURRENT
16.1 RUN ENABLE YES; DI1; ...; DI6; COMM.MODULE YES COMM.MODULE
16.4 FAULT RESET SEL NOT SEL; DI1; ...; DI6; COMM.MODULE NOT SEL COMM.MODULE
21.3 STOP FUNCTION COAST; RAMP COAST RAMP
30.18 COMM FAULT FUNC NO; FAULT; CONST SP 15;
LAST SPEED FAULT
30.19 COMM FLT TIME-OUT 0.1 to 60 s 1.00