ABB IRB 6640, Руководство по эксплуатации продукта

Страница: 31 / 440

1 Safety
1.2.3.6. Safe use of the FlexPendant
29 3HAC026876-001 Revision: F
© Copyri
ght
200
7-2010 ABB.
All rights reserved.
1.2.3.6. Safe use of the FlexPendant
NOTE!
The enabling device is a push-button located on the side of the FlexPendant which, when
pressed halfway in, takes the system to MOTORS ON. When the enabling device is released
or pushed all the way in, the manipulator is taken to the MOTORS OFF state.
To ensure safe use of the FlexPendant, the following must be implemented:
• The enabling device must never be rendered inoperational in any way.
•
During programming and testing, the enabling device must be released as soon as
there is no need for the manipulator to move.
• The programmer must always bring the FlexPendant with him/her when entering the
manipulator's working space. This is to prevent anyone else taking control of the
manipulator without the programmer’s knowledge.
Enabling device
The enabling device is a manually operated, constant pressure push-button which, when
continuously activated in one position only, allows potentially hazardous functions but does
not initiate them. In any other position, hazardous functions are stopped safely.
The enabling device is of a specific type where you must press the push-button only half-way
to activate it. In the fully in and fully out positions, manipulator operation is impossible.
Hold-to-run function
The hold-to-run function allows movement when a button connected to the function is
actuated manually and immediately stops any movement when released. The hold-to-run
function can only be used in manual mode.
How to operate the hold-to-run function is described in Operating manual - IRC5 with
FlexPendant.