4 Repair
4.5.8. Unloading the balancing device using hydraulic press tool.
323
3HAC026876-001 Revision: F
© Copyri
ght
200
7-2010 ABB.
All rights reserved.
Required equipment
Using the correct press device
The different designs of the balancing device require different versions of the press device,
included in the complete press tool. The table below specifies which press device to use to
which balancing device.
The article number of the balancing device may be found on a label at the rear of the balancing
device.
Unloading the balancing device
The procedure below details how to use the press tool in order to unload the balancing device.
How to remove the press tool, is detailed in section
Restoring the balancing device using a
hydraulic press tool. on page 325
Equipment, etc.
Art. no.
Note
Press tool, balancing device
3HAC020902-001
Includes
•
press device 3HAC15767-2
•
press device 3HAC18100-1
Choose the correct device, depending
on model of balancing device.
Hydraulic cylinder
3HAC11731-1
To be used with the press tool.
Hydraulic pump, 80 MPa
3HAC13086-1
To be used with the hydraulic cylinder.
Standard toolkit
-
The content is defined in the section
.
Balancing device
Press device
xx0700000475
Art. no: 3HAC18100-1
xx0300000599
Action
Note
1. Fit the moving pin to the current press device. Choose the correct press device,
.
The moving pin is shown in the figure
Press tool and hydraulic cylinder on
page 322
.
Continued
Continues on next page
Содержание IRB 6640
