User Manual|
VISIX Network Camera
10225 Westmoor Drive, Suite 300, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
67
If you select
Motion & Alarm
, the video will be recorded when the motion
and
alarm are
triggered at the same time.
Besides configuring the recording schedule, you have to configure the settings on the
Motion
Detection
and
Alarm Input Settings
interfaces.
Please refer to
Section 6.6.1
and
Section 6.6.4
for detailed information
.
10)
Record Triggered by Motion | Alarm
If you select
Motion | Alarm
, the video will be recorded when the external alarm is triggered or
the motion is detected.
Besides configuring the recording schedule, you have to configure the settings on the
Motion
Detection
and
Alarm Input Settings
interfaces.
Please refer to
Section 6.6.1
and
Section 6.6.4
for detailed information
.
Figure 7-‐8
Edit Record Schedule
!
Check the checkbox of
Select All
and click
Copy
to copy settings of this day to the
whole week. You can also check any of the checkboxes before the date and click
Copy
.
!
Click
OK
to save the settings and exit the
Edit Record Schedule
interface.
11)
Click
Save
to save the settings.
7.3
Configuring Snapshot Settings
Purpose:
You can configure the scheduled snapshot and event-‐triggered snapshot. The captured picture can be stored
in the SD card (if supported) or the netHDD (For detailed information about netHDD, please refer to
Section
7.1
Configuring NAS Settings
).
You can also upload the captured pictures to a FTP server.
Basic Settings
Steps:
!
Enter the Snapshot Settings interface:
Configuration > Advanced Configuration > Storage > Snapshot
!
Check the
Enable Timing Snapshot
checkbox to enable continuous snapshot.