User Manual|
VISIX Network Camera
10225 Westmoor Drive, Suite 300, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
38
Configuration >
Advanced Configuration >
Network > 802.1X
Figure 6-‐15
802.1X Settings
2)
Check the
Enable IEEE 802.1X
checkbox to enable the feature.
3)
Configure the 802.1X settings, including EAPOL version, user name and password.
Note:
The EAPOL version must be identical with that of the router or the switch.
4)
Enter the user name and password to access the server.
5)
Click
Save
to finish the settings.
Note:
A reboot is required for the settings to take effect.
CONFIGURING QOS SETTINGS
Purpose:
QoS (Quality of Service) can help solve the network delay and network congestion by configuring the
priority of data sending.
Steps:
1)
Enter the QoS Settings interface:
Configuration >Advanced Configuration >
Network > QoS
Figure 6-‐16
QoS Settings
2)
Configure the QoS settings, including video / audio DSCP, event / alarm DSCP and Management
DSCP.
The valid value range of the DSCP is 0-‐63. The bigger the DSCP value is, the higher the priority is.
Note:
DSCP refers to the Differentiated Service Code Point; and the DSCP value is used in the IP
header to indicate the priority of the data.
3)
Click
Save
to save the settings.
Note:
A reboot is required for the settings to take effect.
CONFIGURING UPNP™ SETTINGS
Universal Plug and Play (UPnP™) is a networking architecture that provides compatibility among networking
equipment, software and other hardware devices. The UPnP protocol allows devices to connect seamlessly
and to simplify the implementation of networks in the home and corporate environments.