User Manual|
VISIX Network Camera
10225 Westmoor Drive, Suite 300, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
37
Figure 6-‐14
SNMP Settings
2)
Check the corresponding version checkbox (
,
) to enable the feature.
3)
Configure the SNMP settings.
Note:
The settings of the SNMP software should be the same as the settings you configure here.
4)
Click
Save
to save and finish the settings.
Note:
A reboot is required for the settings to take effect.
CONFIGURING 802.1X SETTINGS
Purpose:
The IEEE 802.1X standard is supported by the network cameras, and when the feature is enabled, the camera
data is secured and user authentication is needed when connecting the camera to the network protected by
the IEEE 802.1X.
Before you start:
The authentication server must be configured. Please apply and register a user name and password for 802.1X
in the server.
Steps:
1)
Enter the 802.1X Settings interface:
,