User Manual|
VISIX Network Camera
10225 Westmoor Drive, Suite 300, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
45
6.5
Configuring Image Parameters
CONFIGURING DISPLAY SETTINGS
Purpose:
You can set the image quality of the camera, including brightness, contrast, saturation, hue, sharpness, etc.
Note:
The display parameters vary according to the different camera models. Please refer to the
actual interface for details.
Steps:
1)
Enter the Display Settings interface:
Configuration > Basic Configuration> Image> Display Settings
Or
Configuration >
Advanced Configuration> Image> Display Settings
2)
Set the image parameters of the camera.
Note:
In order to guarantee the image quality in the different illumination, it provides two sets of
parameters for user to configure.
Day/Night Auto-‐switch
Figure 6-‐25
Display Settings of Day/night Auto-‐switch
Image Adjustment
3)
Brightness:
describes bright of the image, which ranges from 1~100, and the default value is 50.
4)
Contrast:
describes the contrast of the image, which ranges from 1~100, and the default value is
50.
5)
Saturation:
describes the colorfulness of the image color, which ranges from 1~100, and the
default value is 50.
6)
Sharpness:
describes the edge contrast of the image, which ranges from 1~100, and the default
value is 50.
7)
Exposure Settings:
If the camera is equipped with the fixed lens, only
Manual
is selectable, and
the iris mode is not configurable. If
Auto
is selected, you can set the auto iris level from 0~ 100.
For the cameras which supports
P-‐Iris
len, if P-‐Iris lens is adopted, then the P-‐Iris lens type is