User Manual|
VISIX Network Camera
10225 Westmoor Drive, Suite 300, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
33
Figure 6-‐7
Port Settings
2)
Set the
HTTP port, RTSP port and HTTPS port of the camera.
!
HTTP Port: The default port number is 80, and can be changed to any port range 1024 to 65535.
!
RTSP Port: The default port number is 554.
!
HTTPS Port: The default port number is 443, and can be changed to any port range 1024 to 65535.
!
Server Port: The default server port number is 8000.
3)
Click
Save
to save the settings.
Note:
A reboot is required for the settings to take effect.
CONFIGURING PPPOE SETTINGS
Steps:
1)
Enter the PPPoE Settings interface:
Configuration >Advanced Configuration >
Network > PPPoE
Figure 6-‐8
PPPoE Settings
2)
Check the
Enable
PPPoE
checkbox to enable this feature.
3)
Enter
User Name
,
Password
, and
Confirm
password
for PPPoE access.
Note:
The User Name and Password should be assigned by your ISP.
4)
Click
Save
to save and exit the interface.
Note:
A reboot is required for the settings to take effect.
CONFIGURING DDNS SETTINGS
Purpose:
If your camera is set to use PPPoE as its default network connection, you can use the Dynamic DNS (DDNS) for
network access.
Before you start:
Registration on the DDNS server is required before configuring the DDNS settings of the camera.
Steps: