3xLogic VSX-2MP-FE Скачать руководство пользователя страница 43 | Manualshive

Страница: 43 / 79

3xLogic VSX-2MP-FE Скачать руководство пользователя страница 43

User Manual|

VISIX Network Camera

10225 Westmoor Drive, Suite 300, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC

43

4)

Video Type: Select the stream type to video stream, or video & audio composite stream. The
audio signal will be recorded only when the Video Type is Video & Audio.

!

Resolution: Select the resolution of the video output.

!

Bitrate Type: Select the bitrate type to constant or variable.

!

Video Quality: When bitrate type is selected as Variable, 6 levels of video quality are selectable.

!

Frame   Rate:    Set the   frame   rate   to 1/16~25   fps. The   frame   rate   is to describe   the   frequency at which
the video stream is updated and it   is measured by frames per   second (fps). A higher   frame rate   is
advantageous when there   is movement in the   video stream, as it maintains image   quality
throughout.

!

Max. Bitrate: Set the max. bitrate to 32~16384 Kbps. The higher value corresponds to the higher
video quality, but the higher bandwidth is required.

!

Video Encoding: If the Stream Type is set to main stream, H.264 and MJPEG are selectable, and if
the stream type is set to sub stream, H.264, MJPEG, and MPEJ4 are selectable.

Note:

The supported video encoding may differ according to the different platform.

!

Profile: Basic profile, Main Profile and High Profile for coding are selectable.

!

I Frame Interval: Set the I-‐Frame interval to 1~400.

!

SVC: Scalable Video Coding is an extension of the H.264/AVC standard. Set it OFF or ON according
to your actual needs.

5)

Click

Save

to save the settings.

CONFIGURING AUDIO SETTINGS

Steps:

1)

Enter the Audio Settings interface

Configuration >

Basic Configuration >

Video / Audio > Audio

Or

Configuration > Advanced Configuration >

Video / Audio > Audio

Figure 6-‐23

Audio Settings

2)

Configure the following settings.

3)

Audio Encoding: G.711 ulaw, G.711alaw, G.726, and MP2L2 are selectable. And 32kbps, 64kbps,
and 128kbps are supported if MP2L2 is selected.

4)

Audio Input: MicIn and Linein are selectable for the connected microphone and pickup
respectively.

5)

Input Volume: 0-‐100

6)

Environmental Noise Filter: Set it as OFF or ON. When you set the function on the noise detected
can be filtered.

7)

Click

Save

to save the settings.

CONFIGURING ROI ENCODING

«
...
41
42
43
44
45
...
»

Содержание VSX-2MP-FE
















































































Отзывы:

Нет отзывов