User Manual|
VISIX Network Camera
10225 Westmoor Drive, Suite 300, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
40
Figure 6-‐18
Email Settings
3)
Configure the following settings:
!
Sender:
The name of the email sender.
!
Sender’s Address:
The email address of the sender.
!
SMTP Server:
The SMTP Server IP address or host name (e.g., smtp.263xmail.com).
!
SMTP Port:
The SMTP port. The default TCP/IP port for SMTP is 25 (not secured). And the SSL
SMTP port is 465.
!
Enable SSL:
Check the checkbox to enable SSL if it is required by the SMTP server.
!
Attached Image:
Check the checkbox of Attached Image if you want to send emails with attached
alarm images.
!
Interval:
The interval refers to the time between two actions of sending attached pictures.
!
Authentication (optional):
If your email server requires authentication, check
!
this checkbox to use authentication to log in to this server and enter the login user Name and
password.
!
Choose Receiver:
Select the receiver to which the email is sent. Up to 2 receivers can be
configured.
!
Receiver:
The name of the user to be notified.
!
Receiver’s Address:
The email address of user to be notified.
4)
Click
Save
to save the settings.
CONFIGURING NAT (NETWORK ADDRESS TRANSLATION) SETTINGS
Purpose:
1)
Enter the NAT settings interface.
Configuration >Advanced Configuration >
Network > NAT
2)
Choose the port mapping mode.
To port mapping with the default port numbers: