User Manual|
VISIX Network Camera
10225 Westmoor Drive, Suite 300, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
65
Steps:
1)
Enter the Record Schedule Settings interface:
Configuration > Advanced Configuration> Storage > Record Schedule
Figure 7-‐5
Recording Schedule Interface
2)
Check the checkbox of
Enable Record Schedule
to enable scheduled recording.
3)
Set the record parameters of the camera.
Figure 7-‐6
Record Parameters
!
Pre-‐record: The time you set to start recording before the scheduled time or the event. For
example, if an alarm triggers recording at 10:00, and the pre-‐record time is set as 5 seconds,
the camera starts to record at 9:59:55. The Pre-‐record time can be configured as No Pre-‐record,
5 s, 10 s, 15 s, 20 s, 25 s, 30 s or not limited.
!
Post-‐record: The time you set to stop recording after the scheduled time or the event. For
example, if an alarm triggered recording ends at 11:00, and the post-‐record time is set as 5
seconds, the camera records until 11:00:05. The Post-‐record time can be configured as 5 s, 10 s,
30 s, 1 min, 2 min, 5 min or 10 min.
Note:
The record parameter configurations vary depending on the camera model.
4)
Click
Edit
to edit the record schedule.