User Manual|
VISIX Network Camera
10225 Westmoor Drive, Suite 300, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
54
Note:
Set the FTP address and the remote FTP server first. Refer to
Section
6.3.10
for detailed information.
!
Trigger Channel
The video will be recorded when the motion is detected. You have to set the recording schedule to
realize this function. Please refer to
Section 7.2
for detailed information.
!
Trigger Alarm Output
Trigger one or more external alarm outputs when an event occurs.
Note:
To trigger an alarm output when an event occurs, please refer to
Section
6.6.4
to set the related parameters.
Expert Configuration
Expert mode is mainly used to configure the sensitivity and proportion of object on area of each area for
different day/night switch.
Figure 6-‐37
Expert Mode of Motion Detection
!
Day/Night Switch OFF
Steps:
1)
Draw the detection area as in the normal configuration mode. Up to 8 areas are supported.
2)
Select
OFF
for
Switch Day and Night Settings
.
3)
Select the area by clicking the area No.
4)
Slide the cursor to adjust the sensitivity and proportion of object on the area for the selected area.
5)
Set the arming schedule and linkage method as in the normal configuration mode.
6)
Click
Save
to save the settings.
!
Day/Night Auto-‐Switch
Steps:
1)
Draw the detection area as in the normal configuration mode. Up to 8 areas are supported.
2)
Select
Auto-‐Switch
for
Switch Day and Night Settings
.