User Manual|
VISIX Network Camera
10225 Westmoor Drive, Suite 300, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
55
Figure 6-‐38
Day/Night Auto-‐Switch
3)
Select the area by clicking the area No.
4)
Slide the cursor to adjust the sensitivity and proportion of object on the area for the selected area
in the daytime.
5)
Slide the cursor to adjust the sensitivity and proportion of object on the area for the selected area
at night.
6)
Set the arming schedule and linkage method as in the normal configuration mode.
7)
Click
Save
to save the settings.
Day/Night Scheduled-‐Switch
1)
Draw the detection area as in the normal configuration mode. Up to 8 areas are supported.
2)
Select
Scheduled-‐Switch
for
Switch Day and Night Settings
.
Figure 6-‐39
Day/Night Scheduled-‐Switch
3)
Select the start time and the end time for the switch timing.
4)
Select the area by clicking the area No.
5)
Slide the cursor to adjust the sensitivity and proportion of object on the area for the selected area
in the daytime.
6)
Slide the cursor to adjust the sensitivity and proportion of object on the area for the selected area
at night.
7)
Set the arming schedule and linkage method as in the normal configuration mode.
8)
Click
Save
to save the settings.
CONFIGURING VIDEO TAMPERING ALARM
Purpose:
You can configure the camera to trigger the alarm when the lens is covered and take alarm response action.