manualshive.com logo in svg

3D Systems CubePro 3D Printer, Руководство пользователя, Страница: 23 / 110

Поделиться
Скачать
3D Systems CubePro 3D Printer Скачать руководство пользователя страница 23

CONNECTING VIA USB CABLE

The printer can connect to a computer running Windows® 8.1 or Windows 10 using a standard USB A to
USB B cable. You can use the CubePro Print Client to prepare your files for printing or you may also use
any PC application that is Windows 3D print compatible.

Compatible Applications include:

Microsoft® 3D Builder

Microsoft 3D Scan

SolidWorks 2015

Autodesk TinkerCad

Netfabb Professional

Autodesk Mesh Mixer

Siemen's JT2Go

Siemen's Solid Edge

NOTE: The USB connection is only compatible with computers running Windows 8.1 or

Windows 10 operating systems. 

Connect a USB A connector to your computer and connect the USB B connector (A) to your printer.

1.

NOTE: When the USB cable is connected, Windows will automatically obtain the driver

from Windows Update and install it. An internet connection is required.

NOTE: Once the driver has been installed, you can print from any Windows 3D print-

compatible application using the 3D print option.

Once the driver has been installed, you can verify that it installed properly when you see the printer icon in the 

Devices and Printers

 section of the

2.

control panel.

NOTE: You can also view 3D Systems CubePro under 

Printers

 in the Device Manager.

 

Содержание CubePro 3D Printer















































































































Отзывы:

Нет отзывов