3Com PalmPilot Professional, Руководство пользователя

Страница: 160 / 202

page
158
PalmPilot Handbook
■
Make sure batteries are installed properly.
■
Replace the batteries. If PalmPilot still does not operate, try a
soft reset (refer to the following section: Resetting the
PalmPilot
™
Connected Organizer ).
Low battery warning after replacing the batteries:
■
The battery warning message may appear immediately after
replacing the batteries.
In addition, if you check the battery gauge in the Application
picker immediately after replacing the batteries, the gauge
may start at “empty” and slowly rise to “full.” This is normal.
The battery gauge requires a period of a few minutes to
accurately show the condition of the batteries.
No sound:
■
In the Preferences application, General preferences, make
sure the System Sound check box is checked. If the check
box is not checked, there will be no sound. Refer to Chapter
2: Working with the PalmPilot
™
Connected Organizer for
information about how to use the settings in the Preferences
application.
PalmPilot turns itself off:
■
Your PalmPilot is designed to turn itself off after a period of
inactivity. This period can be set at one minute, two minutes
or three minutes. In the Preferences application, General
preferences, check the “Auto-off after” setting, and change the
setting if you need a longer delay before the automatic shutoff
feature is activated. Refer to Chapter 2: Working with the
PalmPilot
™
Connected Organizer for information about how to
use the settings in the Preferences application.
PalmPilot doesn’t recognize my handwriting:
■
For PalmPilot to recognize handwriting input with the stylus,
you need to use the Graffiti character strokes. Refer to the
section entitled “Using the Stylus to Write Text” that appears
in Chapter 2: Working with the PalmPilot
™
Connected