![1010music Bitbox mk2 2.1 Скачать руководство пользователя страница 5](http://html1.mh-extra.com/html/1010music/bitbox-mk2-2-1/bitbox-mk2-2-1_user-manual_3044331005.webp)
WAV Screen
Copyright 1010music LLC 2023
Page 8 of 97
Page 9 of 97
Copyright 1010music LLC 2023
Bitbox MK2 2.1 User Manual
Mar 1, 2023
Bitbox MK2 2.1 User Manual
Mar 1, 2023
Pads Screen
Keys Screen
Grid Screen
GENERAL
WORKFLOW
The bitbox mk2 module allows you to record and
playback samples in creative ways. When working with
bitbox mk2, you create presets that store the selection of
samples and parameters that you want to use together.
You can create any number of presets,
limited only by the space available on your microSD card
(up to 256 GB cards). You can get even more space by
getting more microSD cards.
When creating a preset, you start by assigning WAV files
or banks of flies to pads. Once loaded, bitbox mk2 shows
you a visual representation of your WAV files. Here you
can set the Pad mode and adjust start, length, and loop
points. You can also cut the samples into slices that can
be triggered independently.Pinch and stretch gestures on
the touch screen allow you to zoom into the display of the
wave file to get more precise control when you need it,
and also allow you to zoom out to see the whole picture.
You then use the parameter screen to adjust playback
settings for the pad, and configure modulation sources
for some parameters, such as pitch and filter. Here you
can apply an envelope, configure the per pad LFO,
change between gate, toggle and trigger mode, control
looping, and configure MIDI options.
You can also record a new wav file or a bank of wav files
into a pad if you want to create your own sounds.
Once you have some pads set up, you can trigger them
on the pads screen, play notes with them on the Keys or
Grid screen, or use an external MIDI or CV controller to
trigger them.
Pad Parameters Screen
INTRODUCTION
Welcome to bitbox mk2. Bitbox mk2 puts powerful digital sampling and mangling for
Eurorack at your fingertips. With this module, you can capture samples one at a time,
automate creation of a multi-sample pack, or port over samples from your computer.
You can play back samples in interesting ways, including slicing, granular sounds and
musically intelligent looping capabilities. You can add more interaction by using CV and
MIDI to trigger and modulate samples and effects. You can stream large samples of up
to 4 GB file size straight from the microSD card. Tweak your configurations to get them
just right, then save them to presets for future reuse. With its 3.5 inch touchscreen,
bitbox mk2 makes easy work of selecting, editing, and tweaking your samples. The
more powerful processor of the mk2 enables you to do more with your samples,
including play more polyphony and apply reverb and delay to your sounds.
This manual will walk you through all of the capabilities of bitbox mk2. If you want to
start playing right away, please consult the Quick Start Guide found in the box and
available at
.
We will start by reviewing the general workflow used with bitbox mk2, then continue with
an overview of the controls. Next, we will cover how to install the module in your rack
and do initial setup of the firmware options. Once the module it set up, we will describe
how to create a preset and configure pads. This will include a discussion of the different
pad modes, and how to record a new WAV file. Once you have pads setup, we will
apply effects and adjust the mix. Next, we will go into more depth about preset
management tasks. That will be followed by a discussion of how to use MIDI and CV to
interact with the module, including triggering pads, modulating parameters and
synchronizing clocks. To go deeper, we will discuss how to use presets as templates
and some processor management tips. After that, we will cover how to backup your
presets and WAV files, and upgrade or swap your firmware.
This user manual documents the functionality available in
version 2.1.2 of bitbox mk2. If you have an earlier version
of the mk2 firmware, you can upgrade for free. See
below for the steps to upgrade. To
determine which version of the firmware you are running,
push the Home button repeatedly until you see the Menu
screen shown on the right. The number in the lower right
corner is the current version. The screen shot shows
version 2.1.2S.
Menu Screen