ZyXEL Communications VES-1124 -, User Manual

Page: 166 / 203

VES-1124 User’s Guide
24-12 Introduction to CLI
Table 24-4 Command Summary: ip
COMMAND DESCRIPTION
ip
address [addr] Displays the host IP address.
alias <iface> Sets an alias for the specified
interface.
aliasdis <0|1> Disables/enables the alias for the
specified interface.
arp status Displays all interfaces’ IP Address
Resolution Protocol status.
httpd debug [on|off] Enables or disables the HTTP
debug flag.
icmp
status Displays the ICMP statistics
counter.
discovery <iface> [on|off] Sets the ICMP router discovery
flag.
ifconfig [iface] [ipaddr] [broadcast
<addr> |mtu <value>|dynamic]
Configures a network interface.
ping <hostid> Pings a remote host.
route
status Displays the routing table.
add <dest addr>[/<bits>]
<gateway> [<metric>]
Adds a route.
addiface <dest addr>[/<bits>]
<iface> [<metric>]
Adds an entry to the routing table
for the specified interface.
addprivate <dest addr>[/<bits>]
<gateway> [<metric>]
Adds a private route.
drop <host addr> [/<bits>] Drops a route.
status Displays IP statistic counters.
udp status Displays the UDP status.
tcp
status [tcb] [<interval>] Displays the TCP statistic
counters.
telnet <host> [port] Telnets to the specified host.
traceroute <host> [ttl] [wait] [queries] Sends ICMP packets to trace the
route of a remote host.
igmpsnoop
status Displays the IGMP group table.
querier Displays the port number of the
incoming port that received the
latest IGMP querier.