ZyXEL Communications VES-1124 -, User Manual

Page: 167 / 203

VES-1124 User’s Guide
Introduction to CLI 24-13
Table 24-4 Command Summary: ip
COMMAND DESCRIPTION
enable Turns on IGMP snooping.
disable Turns off IGMP snooping.
dhcp <iface> mode <none | client> Set an interface to accept
information from a DHCP server.
dhcp <iface> status Show whether an interface can
accept information from a DHCP
server.
dhcp <iface> client release Release DHCP information such
as the IP address from an
interface
dhcp <iface> client renew Renew the IP address on the
interface.
dns
stats clear Clears DNS statistics.
stats disp Displays DNS statistics.
24.2.5 vdsl Command
Table 24-5 Command Summary: vdsl
COMMAND DESCRIPTION
vdsl
active [ * | <chan_s> [<chan_e>]] [on
| off] This command actives/deactivates
the VDSL channel(s).
clear [* |<chan_s> [<chan_e>]] Clears VDSL related counters.
condition [ * | <chan_s> [<chan_e>]] Displays VDSL channels details.
debug [ * | <chan_s> [<chan_e>]] [
on | off ] This command sets the VDSL
debug flag.
enet
status [ * | <chan_s>
[<chan_e>]] This command shows the VDSL
status counters.
clear [ * | <chan_s>
[<chan_e>]]
Clear VDSL related counters
mdi [ * | <chan_s> [<chan_e>]]
<mode> Sets the specified subscriber’s
modem’s Ethernet port to either 0:
auto, 1: MDI or 2: MDIX.
monitor [ * | <chan_s>
[<chan_e>]] [ on | off ]
This command sets the VDSL
monitor flag.
phy [ * | <chan_s> [<chan_e>]]
[ lt | nt ] Shows the Ethernet channel’s
PHY registers.