ZyXEL Communications VES-1124 -, User Manual

Page: 110 / 203

VES-1124 User’s Guide
14-2 Port Authentication
Figure 14-2 Port Authentication
14.2.1 Configuring RADIUS Server Settings
From the Port Authentication screen, click RADIUS to display the configuration screen as shown.
Figure 14-3 Port Authentication: RADIUS
The following table describes the labels in this screen.
Table 14-1 Port Authentication: RADIUS
LABEL DESCRIPTION
Authentication Server
IP Address Enter the IP address of the external RADIUS server in dotted decimal notation.
UDP Port The default port of the RADIUS server for authentication is 1812 . You need not change this
value unless your network administrator instructs you to do so.
Shared Secret Specify a password (up to 31 alphanumeric characters) as the key to be shared between the
external RADIUS server and the switch. This key is not sent over the network. This key must
be the same on the external RADIUS server and the switch.
Apply Click Apply to save your changes back to the switch.
Cancel Click Cancel to begin configuring this screen afresh.
14.2.2 Configuring IEEE802.1x
From the Port Authentication screen, click 802.1x to display the configuration screen as shown.