ZyXEL Communications VES-1124 -, User Manual

Page: 178 / 203

VES-1124 User’s Guide
25-8 Command Examples
Figure 25-15 vdsl port status display Command Example
25.5.4 vdsl setmode Command
Syntax:
vdsl setmode [ 0:10BaseS | 1:ANSI | 2:ETSI ]
This command sets the VDSL mode on the VES. The following example sets VDSL mode of the VES to
10BaseS.
Figure 25-16 vdsl setmode Command Example
25.6 Enabling rstp on a VDSL Port
1.
First enable RSTP
sys sw rstp bridge enable
2.
Then enable RSTP on a VDSL port 1
sys sw rstp port enable 1
3.
Save the configuration
config save
VES-1124> vdsl portdetail vdsl11 vdsl13
< vdsl11 >
Upstream Status:
Constellation = QAM 4/Int 32, Rate = 1562500 bps, Fc = 4467773 Hz
SNR = 0.00dB MSE = 0.00dB PSD = 0.00dBm/Hz RSERR = 0 DISC = 0
Downstream Status:
Constellation = QAM 16/Int 24, Rate = 4166666 bps, Fc = 1831054 Hz
SNR = 0.00dB MSE = 0.00dB PSD = -63.34dBm/Hz RSERR = 0
< vdsl12 >
Upstream Status:
Constellation = QAM 4/Int 32, Rate = 1562500 bps, Fc = 4467773 Hz
SNR = 0.00dB MSE = 0.00dB PSD = 0.00dBm/Hz RSERR = 0 DISC = 0
Downstream Status:
Constellation = QAM 16/Int 24, Rate = 4166666 bps, Fc = 1831054 Hz
SNR = 0.00dB MSE = 0.00dB PSD = -63.34dBm/Hz RSERR = 0
< vdsl13 >
Upstream Status:
Constellation = QAM 4/Int 32, Rate = 1562500 bps, Fc = 4467773 Hz
SNR = 0.00dB MSE = 0.00dB PSD = 0.00dBm/Hz RSERR = 0 DISC = 0
Downstream Status:
Constellation = QAM 16/Int 24, Rate = 4166666 bps, Fc = 1831054 Hz
SNR = 0.00dB MSE = 0.00dB PSD = -63.34dBm/Hz RSERR = 0
VES-1124>
VES-1124> vdsl setmode 0
set VDSL mode: 10BaseS
All ports are disabled after VDSL mode changed.
VES-1124>