ZyXEL Communications VES-1124 -, User Manual

Page: 163 / 203

VES-1124 User’s Guide
Introduction to CLI 24-9
Table 24-2 Command Summary: sys sw
COMMAND DESCRIPTION
syspriority <priority> Sets the LACP system priority.
The switch with the lowest priority
becomes the LACP “server”.
trace [level]
Sets the LACP debug level.
dot1x
“sys sw dot1x” commands relate
to IEEE 802.1X security.
enable Enables 802.1X security on the
switch.
disable Disables 802.1X security on the
switch.
status Shows switch 802.1X security
status.
port
enable <port_no> Enables 802.1X security on the
specified port.
disable <port_no> Disables 802.1X security on the
specified port.
reauth <port_no> <on|off> Turns re-authentication on or off
on the specified port.
period <port_no><value>
Configures how often the
specified port should be re-
authenticated.
status <port_no> Displays 802.1X security status
on the specified port.
set
radius server <ip> Sets the external RADIUS server
IP address.
radius secret <secret> Sets the external RADIUS server
password.
radius port <port> Sets the external RADIUS server
port number.
radius show Displays the external RADIUS
server settings.
bmstorm These commands relate to
broadcast storm control.
enable Turns on broadcast storm
control.
disable Turns off broadcast storm
control.
disp Displays broadcast storm control
ports’ settings.