ZyXEL Communications RGS Series, User Manual

Page: 97 / 259

97
5.3.39 AAA – RADIUS
This page allows you to configure the RADIUS servers.
Object Description
Global Configuration
Timeout Timeout is the number of seconds, in the range 1 to 1000, to wait for a reply from a
RADIUS server before retransmitting the request.
Retransmit
Retransmit is the number of times, in the range 1 to 1000, a RADIUS request is
retransmitted to a server that is not responding. If the server has not responded
after the last retransmit it is considered to be dead.
Deadtime Deadtime, which can be set to a number between 0 to 1440 minutes, is the period
during which the switch will not send new requests to a server that has failed to
respond to a previous request. This will stop the switch from continually trying to
contact a server that it has already determined as dead.
Setting the Deadtime to a value greater than 0 (zero) will enable this feature, but
only if more than one server has been configured.
Key The secret key - up to 63 characters long - shared between the RADIUS server
and the switch.
NAS-IP-Address(Attribute
4)
The IPv4 address to be used as attribute 4 in RADIUS Access-Request packets. If
this field is left blank, the IP address of the outgoing interface is used.
NAS-IPv6-Address(Attribute
95) The IPv6 address to be used as attribute 95 in RADIUS Access-Request packets.
If this field is left blank, the IP address of the outgoing interface is used.
NAS-Identifier (Attribute 32) The identifier - up to 253 characters long - to be used as attribute 32 in RADIUS
Access-Request packets. If this field is left blank, the NAS-Identifier is not included
in the packet.
Server Configuration