ZyXEL Communications RGS Series, User Manual

Page: 64 / 259

64
each field (:). For example, 'fe80::215:c5ff:fe03:4dc7'. The symbol '::' is a special
syntax that can be used as a shorthand way of representing multiple 16-bit groups of
contiguous zeros; but it can appear only once. It can also represent a legally valid
IPv4 address. For example, '::192.1.2.34'.
Trap Authentication
Failure Indicates that the SNMP entity is permitted to generate authentication failure traps.
Possible modes are:
Enabled
: Enable SNMP trap authentication failure.
Disabled
: Disable SNMP trap authentication failure.
Trap Link-up and
Link-down Indicates the SNMP trap link-up and link-down mode operation. Possible modes are:
Enabled
: Enable SNMP trap link-up and link-down mode operation.
Disabled
: Disable SNMP trap link-up and link-down mode operation.
Trap Inform Mode Indicates the SNMP trap inform mode operation. Possible modes are:
Enabled
: Enable SNMP trap inform mode operation.
Disabled
: Disable SNMP trap inform mode operation.
Trap Inform Timeout
(seconds)
Indicates the SNMP trap inform timeout. The allowed range is
0
to
2147
.
Trap Inform Retry Times
Indicates the SNMP trap informs retry times. The allowed range is
0
to
255
.
Trap Probe Security
Engine ID Indicates the SNMP trap probe security engine ID mode of operation. Possible values
are:
Enabled
: Enable SNMP trap probe security engine ID mode of operation.
Disabled
: Disable SNMP trap probe security engine ID mode of operation.
Trap Security Engine ID Indicates the SNMP trap security engine ID. SNMPv3 sends traps and informs using
USM for authentication and privacy. A unique engine ID for these traps and informs is
needed. When "Trap Probe Security Engine ID" is enabled, the ID will be probed
automatically. Otherwise, the ID specified in this field is used. The string must contain
an even number (in hexadecimal format) with number of digits between 10 and 64,
but all-zeros and all-'F's are not allowed.
Trap Security Name Indicates the SNMP trap security name. SNMPv3 traps and informs using USM for
authentication and privacy. A unique security name is needed when traps and informs
are enabled.
Buttons
Click to add a new user.
Click to apply changes.
Click to undo any changes made locally and revert to previously saved values.