ZyXEL Communications RGS Series, User Manual

Page: 162 / 259

162
5.3.76 QoS Control List
This page shows the QoS Control List( QCL ), which is made up of the QCE s. Each row describes a QCE that is
defined. The maximum number of QCEs is
256
on each switch.
Click on the lowest plus sign to add a new QCE to the list.
Object Description
QCE Indicates the QCE id.
Port Indicates the list of ports configured with the QCE.
DMAC Indicates the destination MAC address. Possible values are:
Any
: Match any DMAC.
Unicast
: Match unicast DMAC.
Multicast
: Match multicast DMAC.
Broadcast
: Match broadcast DMAC.
The default value is 'Any'.
SMAC Match specific source MAC address or 'Any'.
If a port is configured to match on DMAC/DIP, this field indicates the DMAC.
Tag Type Indicates tag type. Possible values are:
Any
: Match tagged and untagged frames.
Untagged
: Match untagged frames.
Tagged
: Match tagged frames.
The default value is 'Any'.
VID Indicates ( VLAN ID ), either a specific VID or range of VIDs. VID can be in the range
1-4095 or 'Any'
PCP
Priority Code Point: Valid values of PCP are specific(0, 1, 2, 3, 4, 5, 6, 7) or range(0-1,
2-3, 4-5, 6-7, 0-3, 4-7) or 'Any'.
DEI
Drop Eligible Indicator: Valid value of DEI is 0, 1 or 'Any'.
Frame Type
Indicates the type of frame. Possible values are:
Any
: Match any frame type.
Ethernet
: Match EtherType frames.
LLC
: Match ( LLC ) frames.
SNAP
: Match ( SNAP ) frames.
IPv4
: Match IPv4 frames.
IPv6
: Match IPv6 frames.
Action Indicates the classification action taken on ingress frame if parameters configured are
matched with the frame's content.
Possible actions are:
CoS
: Classify Class of Service .
DPL
: Classify Drop Precedence Level .
DSCP
: Classify DSCP value.
Modification Buttons
You can modify each QCE (QoS Control Entry) in the table using the following
buttons:
: Inserts a new QCE before the current row.
: Edits the QCE.
: Moves the QCE up the list.