ZyXEL Communications RGS Series User Manual Download Page 75

Page: 75 / 259

5.3.28 RMON Event

Configure RMON Event table on this page. The entry index key is

Object

Description

Delete

Check to delete the entry. It will be deleted during the next save.

Indicates the index of the entry. The range is from 1 to 65535.

Desc

Indicates this event, the string length is from 0 to 127, default is a null string.

Type

Indicates the notification of the event, the possible types are:

none

: No SNMP log is created, no SNMP trap is sent.

log

: Create SNMP log entry when the event is triggered.

snmptrap

: Send SNMP trap when the event is triggered.

logandtrap

: Create SNMP log entry and sent SNMP trap when the event is

triggered.

Community

Specify the community when trap is sent, the string length is from 0 to 127, default is
"public".

Event Last Time

Indicates the value of sysUpTime at the time this event entry last generated an event.

Buttons

Click to add a new community entry.

Click to apply changes.

Click to undo any changes made locally and revert to previously saved values.

Summary of Contents for RGS Series




































































































































































































































































Search results

Summary of Contents for RGS Series

Reviews:

Related manuals for RGS Series

Brands by name

Popular brands

ZyXEL Communications RGS Series, User Manual

Search results

Summary of Contents for RGS Series

Reviews:

Related manuals for RGS Series

Brands by name

Popular brands