134
would be repeated. The recommended value is 4 times, given that 4 LLDP frames
with a 1 second interval will be transmitted, when an LLDP frame with new information
is received.
It should be noted that LLDP-MED and the LLDP-MED Fast Start mechanism is only
intended to run on links between LLDP-MED Network Connectivity Devices and
Endpoint Devices, and as such does not apply to links between LAN infrastructure
elements, including Network Connectivity Devices, or other types of links.
Coordinates Location
Latitude
Latitude
SHOULD be normalized to within 0-90 degrees with a maximum of 4 digits.
It is possible to specify the direction to either
North
of the equator or
South
of the
equator.
Longitude
Longitude
SHOULD be normalized to within 0-180 degrees with a maximum of 4
digits.
It is possible to specify the direction to either
East
of the prime meridian or
West
of
the prime meridian.
Altitude
Altitude
SHOULD be normalized to within -32767 to 32767 with a maximum of 4
digits.
It is possible to select between two altitude types (floors or meters).
Meters
: Representing meters of Altitude defined by the vertical datum specified.
Floors
: Representing altitude in a form more relevant in buildings which have
different floor-to-floor dimensions. An altitude = 0.0 is meaningful even outside a
building, and represents ground level at the given latitude and longitude. Inside a
building, 0.0 represents the floor level associated with ground level at the main
entrance.
Map Datum
The
Map Datum
is used for the coordinates given in these options:
WGS84
: (Geographical 3D) - World Geodesic System 1984, CRS Code 4327, Prime
Meridian Name: Greenwich.
NAD83/NAVD88
: North American Datum 1983, CRS Code 4269, Prime Meridian
Name: Greenwich; The associated vertical datum is the North American Vertical
Datum of 1988 (NAVD88). This datum pair is to be used when referencing locations
on land, not near tidal water (which would use Datum = NAD83/MLLW).
NAD83/MLLW
: North American Datum 1983, CRS Code 4269, Prime Meridian
Name: Greenwich; The associated vertical datum is Mean Lower Low Water (MLLW).
This datum pair is to be used when referencing locations on water/sea/ocean.
Civic Address Location
Country code
The two-letter ISO 3166 country code in capital ASCII letters - Example: DK, DE or
US.
State
National subdivisions (state, canton, region, province, prefecture).
County
County, parish, gun (Japan), district.
City
City, township, shi (Japan) - Example: Copenhagen.
City district
City division, borough, city district, ward, chou (Japan).
Block (Neighborhood)
Neighborhood, block.
Street
Street - Example: Poppelvej.
Leading street direction
Leading street direction - Example: N.
Trailing street suffix
Trailing street suffix - Example: SW.
Street suffix
Street suffix - Example: Ave, Platz.
House no.
House number - Example: 21.
House no. suffix
House number suffix - Example: A, 1/2.
Summary of Contents for RGS Series
