ZyXEL Communications RGS Series User Manual Download Page 175

Page: 175 / 259

175

5.4.3 IP Status

This page displays the status of the IP protocol layer. The status is defined by the IP interfaces, the IP

routes and the neighbour cache (ARP cache) status.

Object

Description

IP Interfaces

Interface

The name of the interface.

Type

The address type of the entry. This may be

LINK

IPv4

Address

The current address of the interface (of the given type).

Status

The status flags of the interface (and/or address).

IP Routes

Network

The destination IP network or host address of this route.

Gateway

The gateway address of this route.

Status

The status flags of the route.

Neighbor cache

IP Address

The IP address of the entry.

Link Address

The Link (MAC) address for which a binding to the IP address given exist..

Buttons

Click to refresh the page.

Check this box to refresh the page automatically. Automatic refresh occurs
every 3 seconds.

Summary of Contents for RGS Series




































































































































































































































































Search results

Summary of Contents for RGS Series

Reviews:

Related manuals for RGS Series

Brands by name

Popular brands

ZyXEL Communications RGS Series, User Manual

Search results

Summary of Contents for RGS Series

Reviews:

Related manuals for RGS Series

Brands by name

Popular brands