ZyXEL Communications RGS Series User Manual Download Page 229

Page: 229 / 259

229

Object

Description

Switch (stack only)

The stack unit where the entry is learned.

Type

Indicates whether the entry is a static or a dynamic entry.

MAC Address

The MAC address of the entry.

VLAN

The VLAN ID of the entry.

Port Members

The ports that are members of the entry.

Buttons

Check this box to refresh the page automatically. Automatic refresh occurs every 3
seconds.

Refreshes the displayed table starting from the "Start from MAC address" and
"VLAN" input fields.

Flushes all dynamic entries.

Updates the table starting from the first entry in the MAC Table, i.e. the entry with the
lowest VLAN ID and MAC address.

Updates the table, starting with the entry after the last entry currently displayed.

Summary of Contents for RGS Series




































































































































































































































































Search results

Summary of Contents for RGS Series

Reviews:

Related manuals for RGS Series

Brands by name

Popular brands

ZyXEL Communications RGS Series, User Manual

Search results

Summary of Contents for RGS Series

Reviews:

Related manuals for RGS Series

Brands by name

Popular brands