ZyXEL Communications RGS Series User Manual Download Page 202

Page: 202 / 259

202

5.4.28 LACP System Status

This page provides a status overview for all

LACP

instances.

Object

Description

Aggr ID

The Aggregation ID associated with this aggregation instance. For LLAG the id is
shown as 'isid:aggr-id' and for GLAGs as 'aggr-id'

Partner System ID

The system ID (MAC address) of the aggregation partner.

Partner Key

The Key that the partner has assigned to this aggregation ID.

Last Changed

The time since this aggregation changed.

Local Ports

Shows which ports are a part of this aggregation for this switch.

Buttons

Click to refresh the page immediately.

Check this box to refresh the page automatically. Automatic refresh occurs every 3
seconds.

Summary of Contents for RGS Series




































































































































































































































































Search results

Summary of Contents for RGS Series

Reviews:

Related manuals for RGS Series

Brands by name

Popular brands

ZyXEL Communications RGS Series, User Manual

Search results

Summary of Contents for RGS Series

Reviews:

Related manuals for RGS Series

Brands by name

Popular brands