ZyXEL Communications P-791R, User Manual

Page: 258 / 358

Chapter 30 Menus 24.8 to 24.11
P-791R v2 User’s Guide
258
Figure 182 Menu 24: System Maintenance
Enter 10 to go to Menu 24.10 - System Maintenance - Time and Date Setting to update the
time and date settings of your ZyXEL Device as shown in the following screen.
Figure 183 Menu 24.10: System Maintenance - Time and Date Setting
The following table describes the fields in this screen.
Menu 24 - System Maintenance
1. System Status
2. System Information and Console Port Speed
3. Log and Trace
4. Diagnostic
5. Backup Configuration
6. Restore Configuration
7. Upload Firmware
8. Command Interpreter Mode
9. Call Control
10. Time and Date Setting
11. Remote Management
Menu 24.10 - System Maintenance - Time and Date Setting
Time Protocol= None
Time Server Address= N/A
Current Time: 06 : 43 : 17
New Time (hh:mm:ss): 06 : 43 : 00
Current Date: 2000 - 01 - 01
New Date (yyyy-mm-dd): 2000 - 01 - 01
Time Zone= (GMT+0100) Brussels, Copenhagen, Madrid, Paris
Daylight Saving= No
Start Date (mm-nth-week-hr): Jan. - 1st - Sun.(02) - 00
End Date (mm-nth-week-hr): Jan. - 1st - Sun.(02) - 00
Table 89 Menu 24.10: System Maintenance - Time and Date Setting
FIELD DESCRIPTION
Use Time Server
When Bootup
Press [SPACE BAR] and then enter the time service protocol that your timeserver
uses. Not all time servers support all protocols, so you may have to check with your
ISP/network administrator or use trial and error to find a protocol that works. The
main differences between them are the format.
Daytime (RFC 867) format is day/month/year/time zone of the server.
Time (RFC-868) format displays a 4-byte integer giving the total number of
seconds since 1970/1/1 at 0:0:0.
The default,
NTP (RFC-1305) , is similar to Time (RFC-868) .
Select None to enter the new time and new date manually.
Time Server
Address
Enter the IP address or domain name of your timeserver. Check with your ISP/
network administrator if you are unsure of this information. The default is
tick.stdtime.gov.tw