ZyXEL Communications P-791R, User Manual

Page: 43 / 358

Chapter 2 Introducing the Web Configurator
P-791R v2 User’s Guide
43
MAC Address This is the MAC (Media Access Control) or Ethernet address unique to your
ZyXEL Device.
ZyNOS Firmware
Version
This is the ZyNOS Firmware version and the date created. ZyNOS is ZyXEL's
proprietary Network Operating System design.
DSL Firmware
Version
This is the DSL firmware version code associated with the ZyXEL Device. This is
sometimes needed by technicians to help troubleshoot problems.
WAN Information
DSL Mode This is the standard that your ZyXEL Device is using.
IP Address This is the WAN port IP address.
IP Subnet Mask This is the WAN port IP subnet mask.
Default
Gateway
This is the IP address of the default gateway, if applicable.
VPI/VCI This is the Virtual Path Identifier and Virtual Channel Identifier that you entered in
the Wizard or WAN screen.
LAN Information
IP Address This is the LAN port IP address.
IP Subnet Mask This is the LAN port IP subnet mask.
DHCP This is the WAN port DHCP role - Server , Relay or None .
System Status
System Uptime This is the total time the ZyXEL Device has been on.
Current Date/Time This field displays your ZyXEL Device’s present date and time.
System Mode This displays whether the ZyXEL Device is functioning as a router or a bridge.
CPU Usage This number shows how many kilobytes of the heap memory the ZyXEL Device
is using. Heap memory refers to the memory that is not used by ZyNOS (ZyXEL
Network Operating System) and is thus available for running processes like NAT.
The bar displays what percent of the ZyXEL Device's heap memory is in use. The
bar turns from green to red when the maximum is being approached.
Memory Usage This number shows the ZyXEL Device's total heap memory (in kilobytes).
The bar displays what percent of the ZyXEL Device's heap memory is in use. The
bar turns from green to red when the maximum is being approached.
Interface Status
Interface This displays the ZyXEL Device interfaces.
Status This field displays Down (line is down), Up (line is up or connected) if you're
using Ethernet encapsulation and Down (line is down), Up (line is up or
connected), Idle (line (ppp) idle), Dial (starting to trigger a call) and Drop
(dropping a call) if you're using PPPoE encapsulation.
Rate For the LAN port, this displays the port speed and duplex setting. Ethernet port
connections can be in half-duplex or full-duplex mode. Full-duplex refers to a
device's ability to send and receive simultaneously, while half-duplex indicates
that traffic can flow in only one direction at a time. The Ethernet port must use the
same speed or duplex mode setting as the peer Ethernet port in order to connect.
Simultaneous transmissions over the same port (Full-duplex) essentially double
the bandwidth.
For the DSL port, it displays the downstream and upstream transmission rate.
Summary This section is not available if you use the user password to log in.
Packet Statistics Use this screen to view port status and packet specific statistics.
Table 3 Status (continued)
LABEL DESCRIPTION