ZyXEL Communications P-791R, User Manual

Page: 89 / 358

Chapter 6 LAN Setup
P-791R v2 User’s Guide
89
6.4 DHCP Setup
Use this screen to configure the DNS server information that the ZyXEL Device sends to the
DHCP client devices on the LAN.
Figure 36 LAN > DHCP Setup
The following table describes the labels in this screen.
Apply Click Apply to save the changes.
Cancel Click Cancel to begin configuring this screen afresh.
Table 19 LAN > IP > Advanced Setup (continued)
LABEL DESCRIPTION
Table 20 LAN > DHCP Setup
LABEL DESCRIPTION
DHCP Setup
DHCP Select what type of DHCP services the ZyXEL Device provides to the network.
Choices are:
None - the ZyXEL Device does not provide any DHCP services. There is
already a DHCP server on the network.
Relay - the ZyXEL Device routes DHCP requests to the DHCP server. There
may be a DHCP server on another network.
Server - the ZyXEL Device assigns IP addresses and provides subnet mask,
gateway, and DNS server information to the network. The ZyXEL Device is the
DHCP server for the network.
IP Pool Starting
Address
This field is enabled if the ZyXEL Device is a Server . Enter the first of the
contiguous addresses in the IP address pool.
Pool Size This field is enabled if the ZyXEL Device is a Server . Enter the size of, or the
number of addresses in, the IP address pool.
Remote DHCP
Server
This field is enabled if the ZyXEL Device is a Relay . Enter the IP address of the
DHCP server to which the ZyXEL Device should route requests.
DNS Server
DNS Servers
Assigned by DHCP
Server
The ZyXEL Device passes a DNS (Domain Name System) server IP address to
the DHCP clients.