ZyXEL Communications P-791R, User Manual

Page: 216 / 358

Chapter 25 Filter Configuration
P-791R v2 User’s Guide
216
1 Enter 21 in the main menu to open menu 21.
Figure 137 Menu 21: Filter Set Configuration
2 Select the filter set you wish to configure (1-12) and press [ENTER]
.
3 Enter a descriptive name or comment in the Edit Comments field and press [ENTER] .
4 Press [ENTER] at the message [Press ENTER to confirm] to open Menu 21.x - Filter
Rules Summary .
This screen shows the summary of the existing rules in the filter set.
Figure 138 Menu 21.1: Filter Rules Summary
The following table describes the labels in this screen.
Menu 21 - Filter Set Configuration
Filter Filter
Set # Comments Set # Comments
------ ----------------- ------ -----------------
1 NetBIOS_WAN 7 _______________
2 NetBIOS_LAN 8 _______________
3 TELNET_WAN 9 _______________
4 PPPoE 10 _______________
5 FTP_WAN 11 _______________
6 _______________ 12 _______________
Enter Filter Set Number to Configure= 0
Edit Comments= N/A
Menu 21.1 - Filter Rules Summary
# A Type Filter Rules M m n
- - ---- --------------------------------------------------------------- -
1 N
2 N
3 N
4 N
5 N
6 N
Table 75 Abbreviations Used in the Filter Rules Summary Menu
FIELD DESCRIPTION
# This is an index number.
A Active: “Y” means the rule is active. “N” means the rule is inactive.
Type The type of filter rule: “GEN” for Generic, “IP” for TCP/IP.
Filter Rules These parameters are displayed here.