ZyXEL Communications P-791R, User Manual

Page: 219 / 358

Chapter 25 Filter Configuration
P-791R v2 User’s Guide
219
The following figure illustrates the logic flow of an IP filter.
Port # Comp Press [SPACE BAR] and then [ENTER] to select the comparison to apply to the
source port in the packet against the value given in Source: Port # .
Options are None , Equal , Not Equal , Less and Greater .
TCP Estab This field is applicable only when the IP Protocol field is 6, TCP. Press [SPACE
BAR] and then [ENTER] to select Yes , to have the rule match packets that want to
establish a TCP connection (SYN=1 and ACK=0); if No , it is ignored.
More Press [SPACE BAR] and then [ENTER] to select Yes or No . If Yes , a matching
packet is passed to the next filter rule before an action is taken; if No , the packet is
disposed of according to the action fields.
If
More is Yes , then Action Matched and Action Not Matched will be N/A .
Log Press [SPACE BAR] and then [ENTER] to select a logging option from the following:
None – No packets will be logged.
Action Matched - Only packets that match the rule parameters will be logged.
Action Not Matched - Only packets that do not match the rule parameters will be
logged.
Both – All packets will be logged.
Action Matched Press [SPACE BAR] and then [ENTER] to select the action for a matching packet.
Options are
Check Next Rule , Forward and Drop .
Action Not
Matched
Press [SPACE BAR] and then [ENTER] to select the action for a packet not
matching the rule.
Options are
Check Next Rule , Forward and Drop .
When you have Menu 21.1.1 - TCP/IP Filter Rule configured, press [ENTER] at the message “Press
ENTER to Confirm” to save your configuration, or press [ESC] to cancel. This data will now be
displayed on Menu 21.1 - Filter Rules Summary .
Table 77 Menu 21.1.1: TCP/IP Filter Rule
FIELD DESCRIPTION