ZyXEL Communications P-791R, User Manual

Page: 68 / 358

Chapter 5 WAN Setup
P-791R v2 User’s Guide
68
5.4.1 Configuring Advanced Internet Connection
Use this screen to edit your ZyXEL Device's advanced settings for Internet connections. Click
the
Advanced Setup button in the Internet Connection screen. The screen appears as shown.
Figure 24 WAN > Internet Connection > Advanced Setup
The following table describes the labels in this screen.
Standard Mode This field is enabled if Service Type is Server . Select the operational mode the
ZyXEL Device uses in the DSL connection. Annex A refers to connections over
POTS and Annex B refers to connections over ISDN lines.
Apply Click Apply to save the changes.
Cancel Click Cancel to begin configuring this screen afresh.
Advanced Setup Click this button to display the Advanced WAN Setup screen and edit more
details of your WAN setup.
Table 10 WAN > Internet Connection (continued)
LABEL DESCRIPTION
Table 11 WAN > Internet Connection > Advanced Setup
LABEL DESCRIPTION
RIP & Multicast
Setup
RIP Direction RIP (Routing Information Protocol, RFC 1058 and RFC 1389) allows a router to
exchange routing information with other routers. The RIP Direction field controls
the sending and receiving of RIP packets. Select the RIP direction from Both / In
Only / Out Only / None . When set to Both or Out Only , the ZyXEL Device will
broadcast its routing table periodically. When set to Both or In Only , it will
incorporate the RIP information that it receives; when set to None , it will not send
any RIP packets and will ignore any RIP packets received.