ZyXEL Communications P-791R, User Manual

Page: 150 / 358

Chapter 14 Logs
P-791R v2 User’s Guide
150
Figure 78 Logs > View Log
The following table describes the fields in this screen.
14.3 Configuring Log Settings
See Section 14.1 on page 149 for background information. Use the Log Settings screen to
configure where the ZyXEL Device is to send logs; the schedule for when the ZyXEL Device
is to send the logs and which logs and/or immediate alerts the ZyXEL Device is to record. See
Section 14.1 on page 149 for more information.
To change your ZyXEL Device’s log settings, click Maintenance > Logs > Log Settings . The
screen appears as shown.
Alerts are e-mailed as soon as they happen. Logs may be e-mailed as soon as the log is full.
Selecting many alert and/or log categories (especially
Access Control ) may result in many e-
mails being sent.
Table 45 Logs > View Log
LABEL DESCRIPTION
Display The categories that you select in the Log Settings screen display in the drop-down
list box.
Select a category of logs to view; select
All Logs to view logs from all of the log
categories that you selected in the Log Settings page.
Email Log Now Click Email Log Now to send the log screen to the e-mail address specified in the
Log Settings page (make sure that you have first filled in the E-mail Log Settings
fields in Log Settings ).
Refresh Click Refresh to renew the log screen.
Clear Log Click Clear Log to delete all the logs.
# This field displays an index number.
Time This field displays the time the log was recorded.
Message This field states the reason for the log.
Source This field lists the source IP address and the port number of the incoming packet.
Destination This field lists the destination IP address and the port number of the incoming
packet.
Notes This field displays additional information about the log entry.