ZyXEL Communications P-791R, User Manual

Page: 246 / 358

Chapter 29 Firmware and Configuration File Maintenance
P-791R v2 User’s Guide
246
2 The following screen indicates that the Xmodem download has started.
Figure 162 System Maintenance: Starting Xmodem Download Screen
3 Run the HyperTerminal program by clicking Transfer , then Receive File as shown in
the following screen.
Figure 163 Backup Configuration Example
Type a location for storing the configuration file or click Browse to look for one.
Choose the Xmodem protocol.
Then click Receive .
4 After a successful backup you will see the following screen. Press any key to return to
the SMT menu.
Figure 164 Successful Backup Confirmation Screen
29.4 Restore Configuration
This section shows you how to restore a previously saved configuration. Note that this
function erases the current configuration before restoring a previous back up configuration;
please do not attempt to restore unless you have a backup configuration file stored on disk.
FTP is the preferred method for restoring your current computer configuration to your ZyXEL
Device since FTP is faster. Please note that you must wait for the system to automatically
restart after the file transfer is complete.
1
Do not interrupt the file transfer process as this may PERMANENTLY
DAMAGE YOUR ZyXEL Device. When the Restore Configuration process is
complete, the ZyXEL Device will automatically restart.
You can enter ctrl-x to terminate operation any time.
Starting XMODEM download...
** Backup Configuration completed. OK.
### Hit any key to continue.###