manualshive.com logo in svg

ZyXEL Communications NWA1000 Series, User Manual, Page: 74 / 263

Share
Download
ZyXEL Communications NWA1000 Series User Manual Download Page 74

Chapter 9 Network

NWA1000 Series User’s Guide

74

9.3  VLAN

This section discusses how to configure the NWA1000 Series’s VLAN settings.

Figure 43   

Management VLAN Setup

In the figure above, to access and manage the NWA1000 Series from computer 

A

, the NWA1000 Series 

and switch 

B

’s ports to which computer 

A

 and the NWA1000 Series are connected should be in the 

same VLAN.

Link-Local 

Address

This displays the IPv6 link-local address and the network prefix that the NWA1000 Series 
generates itself for the LAN interface.

IPv6 Address/

Prefix Length

Enter the IPv6 address and the prefix length for the LAN interface if you want to use a static 
IP address. This field is optional.

The prefix length indicates what the left-most part of the IP address is the same for all 
computers in the network, that is, the network address.

Gateway

Enter the IPv6 address of the default outgoing gateway using colon (:) hexadecimal 
notation.

Metric

Enter the priority of the gateway (if any) on the LAN interface. The NWA1000 Series decides 
which gateway to use based on this priority. The lower the number, the higher the priority. If 
two or more gateways have the same priority, the NWA1000 Series uses the one that was 
configured first. Enter zero to set the metric to 1024 for IPv6.

DHCPv6 Client

Select this option to set the NWA1000 Series to act as a DHCPv6 client.

DUID

This field displays the DHCP Unique IDentifier (DUID) of the NWA1000 Series, which is unique 
and used for identification purposes when the NWA1000 Series is exchanging DHCPv6 
messages with others. See

 

Appendix B on page 235

 for more information.

Request Address 

Select this option to get an IPv6 address from the DHCPv6 server.

DHCPv6 Request 
Options

Select this option to determine what additional information to get from the DHCPv6 server. 

DNS Server

Select this option to obtain the IP address of the DNS server.

NTP Server

Select this option to obtain the IP address of the NTP server.

Apply

Click 

Apply

 to save your changes back to the NWA1000 Series.

Reset

Click 

Reset

 to return the screen to its last-saved settings. 

Table 30   Configuration > Network > IP Setting (continued)

LABEL 

DESCRIPTION

Summary of Contents for NWA1000 Series








































































































































































































































































Reviews:

No comments