manualshive.com logo in svg

ZyXEL Communications NWA1000 Series, User Manual, Page: 26 / 263

Share
Download
ZyXEL Communications NWA1000 Series User Manual Download Page 26

Chapter 3 Hardware

NWA1000 Series User’s Guide

26

3.2.2  NWA1123-ACv2

The following are the LED descriptions for your NWA1123-ACv2.

Figure 10   

NWA1123-ACv2 LED  

The following are the LED descriptions for your NWA1123-ACv2. 

3.2.3  NWA1123-AC HD

The following are the LED descriptions for your NWA1123-AC HD.

Table 7   NWA1123-ACv2 LED

COLOR

STATUS

DESCRIPTION

Amber

Blinks amber for 1 
second and green for 
1 second alternatively.

The LED blinks orange and green alternatively when the NWA1000 
Series is booting up.

Green

Amber

Blinks amber and 
green alternatively 3 
times and then turns 
solid green for 3 
seconds.

The NWA1000 Series is discovering the NCC.

Green

Green

On

The NWA1000 Series is ready for use and its wireless interface is 
activated.

Slow Blinking (On for 1 
sec, Off for 1 sec)

The wireless module of the NWA1000 Series is disabled or failed, or 
the NWA1000 Series is connected to the NCC, but not registered.

Red

On

The NWA1000 Series failed to boot up or is experience system failure.

Fast Blinking (On for 50 
ms, Off for 50 ms)

The NWA1000 Series is undergoing firmware upgrade.

Summary of Contents for NWA1000 Series








































































































































































































































































Reviews:

No comments