manualshive.com logo in svg

ZyXEL Communications NWA1000 Series, User Manual, Page: 21 / 263

Share
Download
ZyXEL Communications NWA1000 Series User Manual Download Page 21

 Chapter 3 Hardware

NWA1000 Series User’s Guide

21

3.1.2  NWA1123-ACv2

The following are the LED descriptions for your NWA1123-ACv2.

Figure 6   

NWA1123-ACv2 LED  

The following are the LED descriptions for your NWA1000 Series. 

3.1.3  NWA1123-AC HD

The following are the LED descriptions for your NWA1123-AC HD.

Table 3   NWA1123-ACv2 LED

COLOR

STATUS

DESCRIPTION

Amber

Blinks amber for 1 
second and green for 
1 second alternatively. 

The LED blinks orange and green alternatively when the NWA1000 
Series is booting up.

Green

Green

Steady On

The NWA1000 Series is ready for use and its wireless interface is 
activated.

Slow Blinking (On for 1 
sec, Off for 1 sec)

The wireless module of the NWA1000 Series is disabled or failed.

Red

Steady On

The NWA1000 Series failed to boot up or is experience system failure.

Fast Blinking (On for 50 
ms, Off for 50 ms)

The NWA1000 Series is undergoing firmware upgrade.

Slow Blinking (Blink for 
3 times, Off for 3 sec)

The Uplink port is disconnected.

Summary of Contents for NWA1000 Series








































































































































































































































































Reviews:

No comments