manualshive.com logo in svg

ZyXEL Communications NWA1000 Series, User Manual, Page: 204 / 263

Share
Download
ZyXEL Communications NWA1000 Series User Manual Download Page 204

Chapter 27 Troubleshooting

NWA1000 Series User’s Guide

204

3

Inspect your cables for damage. Contact the vendor to replace any damaged cables.

4

Disconnect and re-connect the power adaptor or PoE power injector to the NWA1000 Series. 

5

If the problem continues, contact the vendor.

27.3  NWA1000 Series Access and Login

I forgot the IP address for the NWA1000 Series.

1

The default IP address (in standalone mode) is 192.168.1.2.

2

If you changed the IP address and have forgotten it, you have to reset the device to its factory defaults. 
See 

Section 27.6 on page 210

.

3

If your NWA1000 Series is a DHCP client, you can find your IP address from the DHCP server. This 
information is only available from the DHCP server which allocates IP addresses on your network. Find 
this information directly from the DHCP server or contact your system administrator for more information.

4

If the NCC has managed the NWA1000 Series, you can also check the NCC's 

AP > Monitor > Access 

Point

 screen for the NWA1000 Series's current LAN IP address.

I cannot see or access the 

Login

 screen in the web configurator.

1

Make sure you are using the correct IP address.

• The default IP address (in standalone mode) is 192.168.1.2.
• If you changed the IP address, use the new IP address.
• If you changed the IP address and have forgotten it, see the troubleshooting suggestions for 

I 

forgot the IP address for the NWA1000 Series.

• If the NCC has managed the NWA1000 Series, you can check the NCC's 

AP > Monitor > Access 

Point

 screen for the NWA1000 Series's current LAN IP address.

2

Check the hardware connections, and make sure the LED is behaving as expected. See the Quick Start 
Guide and 

Section 3.1 on page 19

 or 

Section 3.1 on page 19

.

3

Make sure your Internet browser does not block pop-up windows and has JavaScripts and Java 
enabled.

4

Make sure your computer is in the same subnet as the NWA1000 Series. (If you know that there are 
routers between your computer and the NWA1000 Series, skip this step.) 

• If there is a DHCP server on your network, make sure your computer is using a dynamic IP address.
• If there is no DHCP server on your network, make sure your computer’s IP address is in the same 

subnet as the NWA1000 Series.

Summary of Contents for NWA1000 Series








































































































































































































































































Reviews:

No comments