Chapter 15 System
NWA1000 Series User’s Guide
140
To get the NWA1000 Series date and time from a time server:
1
Click
System > Date/Time
.
2
Select
Get from Time Server
under
Time and Date Setup
.
3
Under
Time Zone Setup
, select your
Time Zone
from the list.
4
Under
Time and Date Setup
,
enter a
Time Server Address
.
5
Click
Apply
.
15.4 WWW Overview
The following figure shows secure and insecure management of the NWA1000 Series coming in from the
WAN. HTTPS and SSH access are secure. HTTP, Telnet, and FTP management access are not secure.
Figure 86
Secure and Insecure Service Access From the WAN
15.4.1 Service Access Limitations
A service cannot be used to access the NWA1000 Series when you have disabled that service in the
corresponding screen.
15.4.2 System Timeout
There is a lease timeout for administrators. The NWA1000 Series automatically logs you out if the
management session remains idle for longer than this timeout period. The management session does
not time out when a statistics screen is polling.
Each user is also forced to log in the NWA1000 Series for authentication again when the
reauthentication time expires.
You can change the timeout settings in the
User
screens.